HELIOS
Granules hopper loader

The problem

when conveying abrasive bulk materials, such as glass fibre reinforced plastics, glass fibres, powdered ceramics etc. the usual conveyers of aluminium cast or stainless steel will be worn-out within a short period.

The solution

The vacuum hopper loader / conveyor of extremely wear resistant borosilicate glass are built by HELIOS since 1997. In addition to the abrasion resistance, the conveyed material is visable all side making a control of conveying process possible at any time. The top part can be easily opened by hand. HELIOS resin vacuum conveyors can be combined with a single conveying control unit as a single conveying unit and with a multipoint conveying control as a part of a centralized conveying system with vacuum unit. In doing so, both mini vacuum conveyors for tiniest material quantities and bigger vacuum conveyors can be combined together.

• Adapter for piping systems Ø45, 40 or 38
• quick couplings for adapting to vacuum- and conveying pipes
• finer or wider-meshed filter disc

HFM 1/S

• Output volume per each
  conveying cycle: 1 Liter
• Material touching components of special glass and V2A
• weight 6,5 kg
• Impulse by probe
• Ø 160 mm
• hight 400 mm

HFM 3/S

• Output volume per each
  conveying cycle: 3 Liter
• Material touching components of special glass and V2A
• weight 7,0 kg
• Impulse by probe
• Ø 160 mm
• hight 550 mm

HFM 15/S

• Output volume per each
  conveying cycle: 15 Liter
• Material touching components of special glass and V2A
• weight 10,5 kg
• Impulse by probe
• Ø 315 mm
• hight 700 mm

HFM 1/K

• Output volume per each
  conveying cycle: 1 Liter
• Material touching components of special glass and V2A
• weight 7,0 kg
• Impulse by shutter
• Ø 160 mm
• hight490 mm

HFM 3/K

• Output volume per each
  conveying cycle: 3 Liter
• Material touching components of special glass and V2A
• weight 7,5 kg
• Impulse by shutter
• Ø 160 mm
• hight640 mm

HFM 15/K

• Output volume per each
  conveying cycle: 15 Liter
• Material touching components of special glass and V2A
• weight 14 kg
• Impulse by shutter
• Ø 315 mm
• hight 750 mm

HELIOS conveying controls

The conveyer line HFM can be combined with a single control unit or with a centralized conveying control system. Both types control in addition to the vacuum station over a 2-components mixing valve, an automatic filter cleaning and a discharge valve on each conveying point.

HF-16/64 centralized conveying
control system in series
connection

• up to max. 64 conveying points can be attached under max. 8 conveying lines additionally
• the series connection allows to activate
  additional conveying points from 16 to 64 units in 8-units steps
• operated by Siemens C7-633-panel
• a touch screen panel with monitoring of
  total conveying system is alternatively
  available

Standard equipment

• 100% of conveyed material is visible all side
• parts in contact with conveyed material of special glass (borosilicate glass, highly wear resistant) and stainless steel
• HELIOS – quick sliding guide adapter, vacuum sealed adaptation (Type /S)
  or
  flange for essambly to an intermediate container/drying container (Type /K)
• top to fold up for easy cleaning
• conveyed material is separated from conveying air without filter
• removable sieve disc between glass cylinder and top
• 1 quick-lock only to fold top up
• switch box with a plug for centralized conveying control, probe and mixing valve
• separate ON- / OFF - switch
• piping system Ø 50/65 for vacuum and material
• stable carrying handle

Options

• Adapter für Förderrohrleitungen DN45, DN40 oder DN38
• Schnellkupplungen an Vakuum- und Förderrohranschluß
• Siebscheiben mit feinerer oder gröberer Lochung

direct essambly to the extruder (Type S) or

















to a container cover (Typ K)