HOME
The OKTOMAT® Bulk bag Unloading - Emptying System is very easy to use. The production materials are corresponding to the industrial requirements (INOX, PUR). The Bulk bag Unloader Unloading System is robust and matching to the application in daily practice. The cleaning is uncomplicated and can be done quickly. The equipment is wear resistent in running operating for years. The Bulk bag Unloader System is qualified for any common bulk bag, big bag, FIBC, octobox, Super Sack, ...
Standard Equipment
- enamelled steel frame, height and width adjustable
- pneumatic lifting device with infinitely adjustable lifting power to pull up material storage bag
- suction head type S Standard of stainless steel with an integral vibration device,
conveying pipe Ø 38/50 mm - automatic off-carriage of suction head
by means of counter weight - PUR conveying tube + stainless steel pipe bend
- patented bag-lifting device
The Bulk bag Unloader System OKTOMAT® - match your individual task with 8 fittings optionally for the unloading station
Option 1
Control - empty bag signal
- control unit to set run time when bag or box has been emptied
- optical and acoustic signal when evacuating is almost complete
- potential-free contact for external data interpretation of signal
- the option 1 control is the basic control for option 2 and option 6
at the same time
Option 2
change-over valve between two OKTOMAT®-stations
- automatic change-over to the next full material storage bag
- any number of OKTOMAT® units can be combined
- ideal use in shifts without operating personnel
change-over valve with change-over valve with stainless
EPDM squeeze valves steel pneumatic ball valves
Option 3
special suction heads:
- Micro - conveying pipe-Ø DN-38 / 50 / 65 x 1,5
- S - conveying pipe-Ø DN-38 / 50 / 65/ 80 x 1,5
- XL - conveying pipe-Ø DN-38 / 50 / 65/ 80 x 1,5
Option 4
Additional weight
disc may be
mounted in the suction head types
S-38/50 Standard
The lay-on weight of the suction
head is increased for greater
immersion into bulk material.
Option 5
suction heads with compressed air vibration device
- to avoid electric power in bulk material
- infinitely adjustable vibration
Option 6
oscillating suction head
automatic lifting and lowering while working to enable conveying of materials with poor flow characteristics – such as regrinds, film tapes, powders and tightly compacted material.
Option 7
fluidisation device
The Helios OKTOMAT® with fluidisation
system masters the art of automatically
unloading non-pourable bulk materials,
such as scrap web residue, foils regrind,
agglomerates and pure glass fibres.
HELIOS’ latest development now enables
the automatic emptying and subsequent
conveying of problematic bulk material
whereas, once, this task could only be
performed by means of “showel and pick
work”. A jet of compressed air is directed
to the bulk material through several
adjustable nozzles mounted to the
conical bottom or to the suction head
cover. A special control being always
connected with the option 6 enables
solving the “nearly unsolvable” cases..
Option 8
ATEX
ATEX compliant OKTOMAT®
special application
Zone 1 and 2
Zone 21 and 22
Technical data
hight (mm):
width (mm):
depth (mm):
power supply (V/Hz):
clear width (mm):
throughput rate:
weight (kg):
suction pipe Ø (mm)
* depending on bulk materials and used conveying-systems
von 2730 bis 3780
1095/1295/1495
1150
230/50
895/1095/1295
bis 5000 kg/h *
ca. 145
R 1/4 1G
38/50/65/80
Protected by patents
Saugkopf
Europ.Patent-Nr. EP0765829B1
United States Patent No.6,036,408
Sackhebeverfahren
Europ.Patent-Nr.EP 0819628B1
United States Patent No.5,944,455
Hebering mit Spanngurt
Deutsch.Patent-NrDE 19852259C2
Oszillierender Saugkopf
Europ.Patent-Nr.EP1199266B1
centralized
control system for
Discharging-Conveying- Drying
with touch screen panel
Discharging station Options / technical data
